Table 4 Screens Summary
LINK
Logs
Tools
Config Mode
3.4.3 Summary: Packet Statistics
Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information
here includes port status and packet specific statistics. Also provided are "system up time" and
"poll interval(s)". The Poll Interval(s) field is configurable.
Figure 21 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 5 Summary: Packet Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
PLA-450 User's Guide
TAB
FUNCTION
View Log
Use this screen to view the logs for the categories that you
selected.
Log Settings
Use this screen to change your ZyXEL Device's log settings.
Firmware
Use this screen to upload firmware to your ZyXEL Device.
Configuration
Use this screen to backup and restore the configuration or reset
the factory defaults to your ZyXEL Device.
Restart
This screen allows you to reboot the ZyXEL Device without turning
the power off.
General
This screen allows you to display or hide the advanced screens or
features.
DESCRIPTION
This is the ZyXEL Device's port type.
For the LAN ports, this displays the port speed and duplex setting or Down
when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
Chapter 3 Introducing the Web Configurator
41