Chapter 2 Wireless Tutorial
Figure 4 Network > Wireless LAN > General
2 Make sure the Enable Wireless LAN check box is selected.
3 Enter SSID_Example3 as the SSID and select a channel.
4 Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the
Pre-Shared Key field. Click Apply.
5 Open the Status screen.Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.
Figure 5 Status: Wireless Settings Example
6 Click the WLAN Station Status hyperlink in the AP's Status screen. You can see if any
wireless client has connected to the AP.
28
PLA-450 User's Guide