Remote Management Configuration; Remote Management Overview; Remote Management Limitations - ZyXEL Communications P-660HW-T V2 - VERSION 3.40 User Manual

This chapter provides information on configuring remote management.

15.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
Note: When you choose WAN only or LAN & WAN, you still need to configure a
firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Access
Status field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP

15.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:
• You have disabled that service in one of the remote management screens.
Chapter 15 Remote Management Configuration
C
H A P T E R
Remote Management
P-660HW-T v2 User's Guide
Configuration
1 5
195