Table 80 System Error Logs; Table 81 Access Control Logs - ZyXEL Communications P-660H-TX V2 - VERSION 3-40 User Manual

Chapter 19 Logs
Table 79 System Maintenance Logs (continued)
LOG MESSAGE
Starting Connectivity
Monitor
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
Connect to Daytime server
fail
Connect to Time server fail
Connect to NTP server fail
Too large ICMP packet has
been dropped
Configuration Change: PC =
0x%x, Task ID = 0x%x
Successful SSH login
SSH login failed
Successful HTTPS login
HTTPS login failed

Table 80 System Error Logs

LOG MESSAGE
%s exceeds the max.
number of session per
host!
setNetBIOSFilter: calloc
error
readNetBIOSFilter: calloc
error
WAN connection is down.

Table 81 Access Control Logs

LOG MESSAGE
Firewall default policy: [TCP |
UDP | IGMP | ESP | GRE | OSPF]
<Packet Direction>
Firewall rule [NOT] match:[TCP |
UDP | IGMP | ESP | GRE | OSPF]
<Packet Direction>, <rule:%d>
214
DESCRIPTION
Starting Connectivity Monitor.
The router got the time and date from the Daytime server.
The router got the time and date from the time server.
The router got the time and date from the NTP server.
The router was not able to connect to the Daytime server.
The router was not able to connect to the Time server.
The router was not able to connect to the NTP server.
The router dropped an ICMP packet that was too large.
The router is saving configuration changes.
Someone has logged on to the router's SSH server.
Someone has failed to log on to the router's SSH server.
Someone has logged on to the router's web configurator
interface using HTTPS protocol.
Someone has failed to log on to the router's web configurator
interface using HTTPS protocol.
DESCRIPTION
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
The router failed to allocate memory for the NetBIOS filter
settings.
The router failed to allocate memory for the NetBIOS filter
settings.
A WAN connection is down. You cannot access the network
through this interface.
DESCRIPTION
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or forwarded
according to the default policy's setting.
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall rule
(denoted by its number) and was blocked or forwarded
according to the rule.
P-660H-Tx v2 User's Guide