Figure 56 Address Mapping Rules; Table 32 Address Mapping Rules - ZyXEL Communications P-660H-TX V2 - VERSION 3-40 User Manual

Chapter 7 Network Address Translation (NAT) Screens
rules. For example, if you have already configured rules 1 to 6 in your current set and now you
configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if
you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new
rules 4, 5 and 6.
To change your ZyXEL Device's address mapping settings, click Network > NAT > Address
Mapping to open the following screen.

Figure 56 Address Mapping Rules

The following table describes the fields in this screen.

Table 32 Address Mapping Rules

LABEL
#
Local Start IP
Local End IP
Global Start IP
Global End IP
106
DESCRIPTION
This is the rule index number.
This is the starting Inside Local IP Address (ILA). Local IP addresses are N/A for
Server port mapping.
This is the end Inside Local IP Address (ILA). If the rule is for all local IP addresses,
then this field displays 0.0.0.0 as the Local Start IP address and 255.255.255.255
as the Local End IP address. This field is N/A for One-to-one and Server mapping
types.
This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if you have a
dynamic IP address from your ISP. You can only do this for Many-to-One and
Server mapping types.
This is the ending Inside Global IP Address (IGA). This field is N/A for One-to-one,
Many-to-One and Server mapping types.
P-660H-Tx v2 User's Guide