Install The Hardware - ZyXEL Communications NWA-1100 - QUICK GUIDE V1.00 Quick Start Manual

Install the Hardware

Figures in this section use generic icons. The ZyXEL Device in the picture is
not an exact representation of your device.
Attaching Antennas
Screw the antennas clockwise onto the antenna
connectors on the sides of your NWA1100. The
antennas should be perpendicular to the ground and
parallel to each other.
Make sure the antennas are securely screwed onto the
antenna connectors.
Hardware Mounting
In general, the best location for the access point is at the center of your
intended wireless coverage area. For better performance, mount the
NWA1100 high up in an area that is free of obstructions.
Wall-mounting
Do the following to attach your NWA1100 to a wall.
ENGLISH
ENGLISH
15