Figure 30 Network > Wireless Lan > General; Figure 31 Network > Wireless Lan > General - ZyXEL Communications NBG-318S User Manual

Chapter 4 Wireless Tutorial
Figure 30 Network > Wireless LAN > General
4 Make sure the Enable Wireless LAN check box is selected.
5 Enter SSID_Example3 as the SSID and select a channel.
6 Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the
Pre-Shared Key field. Click Apply.
7 Open the Status screen.Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.
Figure 31 Network > Wireless LAN > General
8 Click the WLAN Station Status hyperlink in the AP's Status screen. You can see if any
wireless client has connected to the AP.
62
NBG-318S User's Guide