Pppoe Encapsulation - ZyXEL Communications NBG-318S User Manual

Chapter 6 WAN
Table 33 Network > WAN > Internet Connection: Ethernet Encapsulation
LABEL
Set WAN MAC
Address
Apply
Reset

6.4.2 PPPoE Encapsulation

The NBG-318S supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF
standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband
modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dial-
up connection using PPPoE.
For the service provider, PPPoE offers an access and authentication method that works with
existing access control systems (for example Radius).
One of the benefits of PPPoE is the ability to let you access one of multiple network services,
a function known as dynamic service selection. This enables the service provider to easily
create and offer new IP services for individuals.
Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as it requires
no specific configuration of the broadband modem at the customer site.
By implementing PPPoE directly on the NBG-318S (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the NBG-318S does that
part of the task. Furthermore, with NAT, all of the LANs' computers will have access.
This screen displays when you select PPPoE encapsulation.
92
DESCRIPTION
Select this option and enter the MAC address you want to use.
Click Apply to save your changes back to the NBG-318S.
Click Reset to begin configuring this screen afresh.
NBG-318S User's Guide