Figure 59 Network > Homeplug > Edit; Table 41 Network > Homeplug > Edit - ZyXEL Communications NBG-318S User Manual

Chapter 8 HomePlug AV
LABEL
Member Action
Scan
Click on Network > HomePlug > Edit to see the screen below. Use this screen to add a new
HomePlug AV device to the network. You can also edit a device's details.
Figure 59 Network > HomePlug > Edit
The following table describes the labels in the screen.
Table 41 Network > HomePlug > Edit
LABEL
Device Information
Nickname
MAC Address
DAK Password
Apply
Cancel
110
DESCRIPTION
This field shows the Edit icon and the Delete icon. Click on Edit to
add a device to the network or to edit details such as the device's
Nickname. Click on Delete to remove the device from the network.
If you want to set up a second network, remove the devices from My
HomePlug Network that you want to keep in your first network
before you set the new Network Name for the second network.
Click Scan to detect devices on the same electrical circuit as the
NBG-318S.
DESCRIPTION
Type a name you wish to use to identify a specific powerline
adapter, for example, "Bob's room".
This is the MAC address of the HomePlug AV device. The MAC
Address will appear in this field if the device's status is either Active
or Not Member. If the device's status is Out of Network or your
NBG-318S can not detect it, type the MAC Address here.
The DAK Password (DAK stands for Device Access Key), is used
to verify that you are authorized to perform changes on a device.
You can find the DAK printed on a sticker on the bottom of a
HomePlug enabled device.
Click this button to apply add the device to the network or to apply
your changes.
Click this button to return to the previous screen.
NBG-318S User's Guide