Saving Your Configuration; Switch Lockout; Figure 9 Change Administrator Login Password - ZyXEL Communications MS-7206 User Manual

Chapter 4 The Web Configurator

Figure 9 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back
to the run-time memory. Settings in the run-time memory are lost when the MM-7201's power
is turned off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the MM-7201's storage
that remains even if the MM-7201's power is turned off.
Use the Save link when you are done with a configuration session.

4.5 Switch Lockout

You could block yourself (and all others) from using in-band-management (managing through
the data ports on the interface modules) if you do one of the following:
1 Delete the management VLAN (default is VLAN 1).
2 Delete all port-based VLANs with the CPU port as a member. The "CPU port" is the
management port of the switch.
3 Filter all traffic to the CPU port.
4 Disable all ports.
5 Misconfigure the text configuration file.
6 Forget the password and/or IP address.
7 Prevent all services from accessing the switch.
52
MS-7206 User's Guide