Clustering Management Status; Figure 127 Clustering Management Status; Table 89 Clustering Management Status - ZyXEL Communications MS-7206 User Manual

Chapter 40 Cluster Management

40.2 Clustering Management Status

Use this screen to manage switches through one switch, called the cluster manager. The
switches must be directly connected and be in the same VLAN group so as to be able to
communicate with one another. To open this screen, click Management > Cluster
Management.
A cluster can only have one manager.

Figure 127 Clustering Management Status

The following table describes the labels in this screen.

Table 89 Clustering Management Status

LABEL
Status
Manager
The Number of
Member
Index
MacAddr
Name
Model
Status
226
DESCRIPTION
This field displays the role of this switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member switch directly
and not via the cluster manager)
None (neither a manager nor a member of a cluster)
This field displays the cluster manager switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The following
fields describe the cluster member switches.
You can manage cluster member switches via the cluster manager switch. Each
number in the Index column is a hyperlink leading to the cluster member switch's web
configurator (see Figure 128 on page
This is the cluster member switch's hardware MAC address.
This is the cluster member switch's system name.
This field displays the model name.
This field displays:
Online (the cluster member switch is accessible)
Error (for example the cluster member switch password was changed or the switch
was set as the manager and so left the member list, etc.)
Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after
the link between cluster member and manager goes down)
227).
MS-7206 User's Guide