ZyXEL Communications MES-2110 User Manual page 98

Chapter 13 Broadcast Storm Control
The following table describes the labels in this screen.
Table 38 Configuration > Storm Control
LABEL
Storm Control Configuration
Port Number
Mode
Rate Level
Rate Limit
Active
Undo
Apply
Storm Control Status
Port
Broadcast
Limit
Active
Multicast Limit
Active
DLF Limit
Active
98
DESCRIPTION
Use this to select a port number.
Select the Broadcast, Multicast or DLF mode from the list.
Select a rate range from the list. Options are: 64K~960K (64+),
1M~100M (1M+), 110M~1000M (10M+).
Specify specify how many frames the port receives per second. The unit
changes depending on how you configure in the Rate Level field. The
value you enter in this field must be within the rate level range.
Use this to enable or disable storm control.
Click this to restore your last saved settings.
Click this to save your changes.
This is the port number.
This is the broadcast frame limit on the port.
This shows whether broadcast control is enabled or disabled on the port.
This is the multicast frame limit on the port.
This shows whether multicast control is enabled or disabled on the port.
This is the Destination Lookup Failure (DLF) frame limit on the port.
This shows whether DLF control is enabled or disabled on the port.
MES-2110 User's Guide