ZyXEL Communications MES-2110 User Manual page 69

Click Configuration > 802.1x > Port Configuration in the navigation panel to
display the screen as shown.
Figure 33 Configuration > Port Configuration
The following table describes the labels in this screen.
Table 16 Configuration > Port Configuration
LABEL
Port
Active
Guest VLAN
Reauthenticat
ion
Reauth-Period
(1-999999)
Undo
Apply
MES-2110 User's Guide
DESCRIPTION
This field displays the port number.
Select this check box to permit 802.1x authentication on the Switch.
Note: You must first enable 802.1x authentication on the Switch
before configuring it on each port.
You can configure this if you have enabled the guest VLAN feature in the
Configuration > Global Configuration screen
)
page 67 .
Select Enable then enter the number that identifies the Guest VLAN.
Make sure this is the Guest VLAN recognized in your network.
Clients belonging to the guest VLAN can access unprotected areas in your
network, such as the Internet.
Select Disable if you do not want to use this feature.
Specify if a subscriber has to periodically re-enter his or her username
and password to stay connected to the port.
Specify how often (in minutes) a client has to re-enter his or her
username and password to stay connected to the port.
Default is 3600 minutes (or 1 hour).
Click this to restore your last saved settings.
Click this to save your changes.
Chapter 9 802.1x
(see
Section 9.2 on
69