ZyXEL Communications ES-2108 User Manual page 62

Chapter 5 Initial Setup Example
1 Click Advanced Application > VLAN in the navigation panel and click the Static
VLAN link.
2 In the Static VLAN
screen, select
ACTIVE, enter a
descriptive name in the
Name field and enter 2
in the VLAN Group
ID field for the
VLAN2 network.
The VLAN Group ID field in this screen and the VID field in the IP Setup
screen refer to the same VLAN ID.
3 Since the VLAN2 network is connected to port 5 on the Switch, select Fixed to
configure port 5 to be a permanent member of the VLAN only.
4 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames
properly, clear the TX Tagging check box to set the Switch to remove VLAN tags before
sending.
5 Click Add to save the settings to the run-time memory. Settings in the run-time memory
are lost when the Switch's power is turned off.
62
ES-2108 Series User's Guide