ZyXEL Communications ES-2108 User Manual page 250

Appendix A Product Specifications
Table 103 Hardware Specifications
Fast Ethernet Interface
100 Mbps SFP Interface
Gigabit Interface
LEDs
Operating Environment
Storage Environment
The following are dimensions of an M4 tap screw and masonry plug used for wall mounting.
All measurements are in millimeters (mm).
250
Eight 10/100 Base-TX interfaces
Auto-negotiation
Auto-MDI/MDIX
Compliant with IEEE 802.3/802.3u
Back pressure flow control for half duplex mode
Flow control for full duplex (IEEE 802.3x)
RJ-45 Ethernet cable connector
Rate limiting at 64Kbps steps
The ES-2108PWR has 8 IEEE 802.3af Power over Ethernet compliant
Ethernet Ports (maximum 15.4 Watt/port, 123.2 Watt/system)
ES-2108-F Only: Fast Ethernet SFP open slot for transceiver of 100BASE-
FX, 100BASE-LX or 100BASE-BX
One Gigabit Ethernet/mini-GBIC slot (ES-2108-G and ES-2108PWR only)
One mini-GBIC slot and one Gigabit 100 Base-FX fiber optic port (ES-2108-
LC only)
Compliant with 802.3z/802.3ab/802.3u
Copper/fiber interface auto-selection by signal detection (fiber first)
Per Switch: PWR (Green), SYS (Green), ALM (Red)
Per Ethernet port: LNK/ACT (Amber/Green)
1000BASE-T RJ45: SPD (Amber/Green), LNK/ACT (Green)
SFP: LNK (Green), ACT (Green)
100FX: LNK (Green), ACT (Green)
Temperature: 0º C ~ 45º C (32º F ~ 113º F)
Humidity: 10 ~ 90% (non-condensing)
Temperature: -10º C ~ 70º C (13º F ~ 158º F)
Humidity: 10 ~ 90% (non-condensing)
ES-2108 Series User's Guide