ZyXEL Communications ES-2108 User Manual page 120

Chapter 14 Mirroring
Table 31 Advanced Application > Mirroring (continued)
LABEL
Ingress
Egress
Port
*
Mirrored
Direction
Apply
Cancel
120
DESCRIPTION
You can specify to copy all incoming traffic or traffic to/from a specified MAC address.
Select All to copy all incoming traffic from the mirrored port(s).
Select Destination MAC to copy incoming traffic to a specified MAC address on the
mirrored port(s). Enter the destination MAC address in the fields provided.
Select Source MAC to copy incoming traffic from a specified MAC address on the
mirrored port(s). Enter the source MAC address in the fields provided.
You can specify to copy all outgoing traffic or traffic to/from a specified MAC address.
Select All to copy all outgoing traffic from the mirrored port(s).
Select Destination MAC to copy outgoing traffic to a specified MAC address on the
mirrored port(s). Enter the destination MAC address in the fields provided.
Select Source MAC to copy outgoing traffic from a specified MAC address on the
mirrored port(s). Enter the source MAC address in the fields provided.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select this option to mirror the traffic on a port.
Specify the direction of the traffic to mirror. Choices are Egress (outgoing), Ingress
(incoming) and Both.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to start configuring the screen again.
ES-2108 Series User's Guide