Features; Installation - LENCO IPD-5200 User Manual

Eng
11. Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a m onth or
longer, the power cord should be unplugged from the unit to prevent damage or
corrosion.
13. Servicing
The user should not attempt to service the unit beyond those methods described
in the user's operating instructions. Service methods not covered in the operating
instructions should be referred to qualified service personnel.

Features

Thank you for purchasing the PORTABLE RADIO iPod DOCKING.
This model incorporates following features :
Different iPod models Player / Re-charger
FM receiver with digital read out on LCD
Clock and Alarm timer function
Wake up to Alarm (Buzzer), Radio or iPod with Snooze function
Sleep timer function
LCD display with back-light
Audio line-in (AUX) for connecting other digital audio player
Built-in 2 High Fidelity Speakers
Preset EQ effect
iPod, iPod mini, iPod nano, iPod touch, iPod classic and iPod shuffle are trademarks
of Apple Computer Inc., registered in the U.S. and other countries.
iPod is not included.
4
IPD5200 iB.indd IPD5200 iB.indd EN14-EN15 EN14-EN15
size:105x146mm,material:80gms book paper,BK+BK
Eng

Installation

Clock setting battery back-up
A backup battery compartment located at rear of the unit.
(1) Open the main battery compartment lid then open the inner clock battery
compartment lid as well.
(2) For clock setting backup, follow the polarity diagram shown inside the
compartment and install 2 x AAA (UM-4) batteries (purchase separately).
(3) Close the clock battery compartment lid.
Install main battery
(4) For radio, iPod and AUX operation, follow the polarity diagram shown inside
the compartment and install 6 x AA (UM-3) batteries (purchase separately).
(5) Close the main battery compartment lid.
AC-DC Adaptor Connection
The unit can be powered by an external AC-DC Adaptor, required the output DC 9V
1250mA (included).
(1) Firmly and securely plug the adaptor's AC plug into AC main outlet.
(2) Connect the adaptor's DC output plug to the DC-in jack of the unit.
Warnings:
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
5
2010-10-11 2010-10-11 8:22:46 8:22:46