Related Manuals for LENCO IPOD TOWER 1
Summary of Contents for LENCO IPOD TOWER 1
- Page 1 1 USER MANUAL For information and support, www.lenco.eu...
-
Page 2: Base Plate Installation
FOREWORD BASE PLATE INSTALLATION (INSTALLATION SKETCH MAP) (DESIGN SKETCH) THANKS Dear Customer, May we take this opportunity to thank you for purchasing this player. We strongly recommend that you carefully read the User Manual before attempting to operate the unit and that you note the listed precautions. 1. -
Page 3: Radio Operation
RADIO OPERATION WARNING Please read and understand all the warnings given in the following and those marked 1. Enter FM Function on the unit. This unit has been designed and manufactured to assure personal safety. In the turn-on or playing status, press the button on the remote control to enter FM mode. -
Page 4: Basic Operation
BASIC OPERATION PANELS USB/DIGITAL CARD It is possible to listen to audio files using the USB or CARD interface of this unit. 1. Connect the USB device or CARD with this unit. 2. Press the USB/SD button on the remote control to play the USB or CARD. Press USB/SD button again to switch between USB and CARD modes. -
Page 5: Remote Control
BASIC OPERATION REMOTE CONTROL MENU BUTTON NOTE: While playing the IPOD, press the MENU button to return the main menu status. 1. Align the remote control directly at the remote control sensor of the device. 2. The range of the remote control depends on the charge of the battery. 3. -
Page 6: System Connection
SYSTEM CONNECTION BASIC OPERATION PREPARATION Before connecting acoustic equipment, pay attention to the picture below. 1) Before the unit is turned on, please check if all the connections are right and safe. Each connection must be safe and firm. Disconnect power cable until you have Then connect the main power.