Listening To Ipod; Ipod Adaptors - LENCO ID-2 User Manual

Docking station for ipod
Hide thumbs Also See for ID-2:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
®

iPod Adaptors

Five different adaptors are designed to suit any "dockable" iPod model to
th e d ocking s tation. B efore c onnecting y our iP od to th e system, s elect a nd
insert t he p roper a daptor f or y our i Pod model into the docking station first
®
(refer to following iPod adaptor table).
®
iPod adaptor Table :
* For the 5G (fifth generation) 30GB and 60GB iPods with video capability.
Please use the original ada ptor from your 5G iPod model at the time of
purchase. No 5G adaptor is provided from this system.
®
®
®
®
7

Listening to iPod

This model includes adaptors for adopting different iPod models. If the
docking port will not be used for an extended period of time, it is
recommended to cover the docking port by using the "Dock Cover" insert
(included).
1. Select a suitable adaptor for your iPod and insert it into the docking area.
Your iPod can now be inserted into the docking port by placing the
connector on the bottom of the iPod onto the connector in the docking bay.
Caution: Please be careful when seating the iPod into the docking to
avoid damaging the 30-pin connector on the iPod or in the
docking system.
2. Press the POWER button to turn on the unit.
Note: (i) No 3.5mm stereo audio plug should be plugged into the AUX IN
jack, otherwise the unit will switch to AUX IN mode.
(ii) Once the power is ON, it charges the iPod.
3. Press & hold the PLAY / PAUSE
4. Press the iPod PLAY/PAUSE
5. Adjust the sound level by pressing the VOLUME +/- button.
Note : The volume level cannot be adjusted using the volume control
on your iPod after being docked.
6. To remove the iPod from the unit, press and hold the iPod PLAY/PAUSE
button for three seconds to switch off the device and then gently
remove it from the docking connector.
iPod playback control (from your iPod):
- Press the PLAY/PAUSE
button to pause or resume the iPod playback;
- Press the Skip/Search Forward
the next or previous song;
- Press and hold the Skip/Search Forward
for fast-forwarding or fast-rewinding during playback.
button from your iPod to turn it on.
button to start music playback.
or Backward
button to skip to
or Backward
button
8

Advertisement

Table of Contents
loading

Table of Contents