Important Safety Instructions - LENCO ID-2 User Manual

Important Safety Instructions

When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety.
However, improper use can result in potential electrical shock or fire hazards.
Please read all safety and operating instructions carefully before installation
and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
1.Water and Moisture
The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a set basement.
2.Heat and Flame
The unit should be situated away from heat sources such as radiators,
heat registers, stoves or other appliances (including amplifiers) that
produce heat.
3.Power Source
The unit should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
4.Power Cord Protection
Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. It is always
best to have a clear area from where the cord exits the unit to where it is
plugged into an AC outlet.
5.Cleaning
The unit should be cleaned only as recommended. See the section "Care
and Maintenance" of this manual for cleaning instructions.
6.Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
7.Attachments
Do not use attachments that are not recommended by the product
manufacturer.
8.Lightning and Power Surge Protection
Unplug the unit from the wall outlet and disconnect it during these periods
of time. This will prevent damage to the product due to lightning and
power-line surges.
9.Overloading
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire of electric shock.
3
10.Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit exhibits a marked change in performance or does not operate
normally.
11.Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a
month or longer, the power cord should be unplugged from the unit to
prevent damage or corrosion.
12.Environment
Attention should be drawn to the environmental aspects of the use of
apparatus in moderate climates.
13.Servicing
The user should not attempt to service the unit beyond those methods
described in the user's operating instructions.
Service methods not covered in the operating instructions should be
referred to qualified service personnel.
Warning:
- The ventilation should not be impended by covering the ventilation
openings with items, such as newspaper, table-cloths, curtains, etc.
- No naked flame sources, such as lighted candles should be placed
on the apparatus.
- It shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
- Do not place the product in closed bookcases or racks without
proper ventilation.
- Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
4