Channel Setup Options; Channel Search; Digital Cable Search Optional - Sanyo DP42545 Owner's Manual

CHANNEL SETUP OPTIONS

Channel Search

Use Channel Search to replace the
existing Digital and Analog Channel
Scan databases, such as, if you move
to another city.
NOTES: To receive Digital Cable channels,
you have to perform a Digital
Cable Search.
To add new Digital channels to
the existing database, use Digital
Add-on Search . See page 18.
1 Press the TUNER key to select
the Digital Tuner.
2 Press the MENU key to display
the Main menu.
Digital Cable Search
( )
Optional
This Plasma TV can receive unscram-
bled (ClearQAM) Digital
Channels, when available. However,
not all cable companies provide Clear-
QAM digital channels.
Searching for Digital Cable Channels
will take about 10 minutes, please be
patient.
Channel numbers will appear under
the progress bar only when a channel
is found.
IMPORTANT FACT: This TV maintains only
one database of digital channels. There-
fore, when you search for ClearQAM digital
cable channels, the database of digital
antenna channels will be deleted. You will
only be able to receive those ClearQAM
channels your cable company provides.
Cable companies rearrange virtual chan-
nels as programming changes, which may
cause the program you are watching to
move to another channel. This message
will appear on the screen briefly to notify
you of a change. You will have to relocate
the program you were watching by scan-
ning through the channels.
Use the CURSOR LM keys to
3
highlight the Channel category.
Press ENTER.
Use the CURSOR LM keys to
4
highlight the Channel Search
option. Press ENTER.
Use the CURSOR M key to
5
choose Yes. Press ENTER.
NOTE: After Channel Search is com-
plete, the TV will tune to the
lowest Digital Cable channel (or
Digital D03 if no Digital channels
are found).
Program change from
cable company
To restore the digital antenna channel
Cable
database, reconnect the antenna and use
the menu system to perform a normal
Channel Search.
1 Connect a Digital Cable signal
directly to the TV's Digital Antenna
In terminal.
DIGITAL DIGITAL
DIGITAL DIGITAL
AUDIO AUDIO
ANTENNA IN ANTENNA IN
OUTPUT OUTPUT
2 Press the TUNER key to select
the Digital Tuner.
3 Press the MENU key to display
the Main menu.
Use the CURSOR LM keys to
4
highlight the Channel category.
Press ENTER.
Use the CURSOR LM keys to
5
highlight the Digital Cable Search
option. Press ENTER.
6
Digital
Cable Signal
UHF UHF
Channel Setup Options continued on next page.
Use the CURSOR M key to
choose Yes. Press ENTER.
17