Audio Cables—Provides analog left and
right audio for your external equipment
connections.
Composite Audio/Video (RCA type)—Use
these
cables
audio / video connections. Normally cables
are color-coded: Yellow for Video, White for
(L) Audio, and Red for (R) Audio.
Component:Y, Pb, Pr—Use these cables to
connect your component equipment. This
connection provides the best picture, but
does not include sound. (Cable colors:
Y=green, Pb=blue, and Pr=red.)
Channel
ML keys
CH
Top Panel (
see items 8, 11, & 17 on page 15)
Back Panel (L)—Bottom View
Service Jacks—For production use only.
Digital Audio Output—Use an Optical Audio cable to
connect the Digital Audio Output to an advanced stereo
home theater system equipped with Dolby
Digital Antenna Input—Connect an RF antenna
coaxial cable to this terminal as shown on page 7 .
Analog Antenna Input—Connect an RF antenna or
the RF output from a VCR or Satellite Receiver to this
terminal using a coaxial cable as shown on page 7 .
Analog Audio Out (L/R) Jacks—Connect external
audio equipment here. (See page 13.)
GLOSSARY OF CABLE TYPES
for
standard
TOP AND BACK PANELS
Power key
Volume
– + keys
POWER
VOL
Back Panel (L)
UHF/VHF/CATV
UHF/VHF/CATV
®
Digital 5.1.
analog
NOTE: None of these cables are supplied with this Plasma TV.
S-Video Input (Video 1)—To enhance video detail
connect an S-Video cable to the S-Video jack instead
of using the Video jack, if available on your external
equipment. (S-Video connection will override connec-
tion to the Video 1 input jack.)
Audio/Video Input (Video 1)—Connect standard
video equipment here using a composite audio / video
cable (see page 12).
NOTE: S-Video connection overrides the Video 1 composite
connection.
Component Video and Audio Input (COMPO 2 &
COMPO 3)—Connect digital video equipment to the Y,
Pb, Pr video and L/R audio jacks using a Component
cable and an Audio cable.
Reset Button—Press this button to reset the TV's
digital microprocessor if the image "freezes" or "stalls. "
AC IN 120V—Connect power cord here. See page 8.
Optical Audio—Use this cable to connect
the TV's digital audio output to a multi-
channel audio receiver.
S-Video Cable—This cable provides sepa-
rate luminance and color signals for higher
resolution and better picture quality. Use this
cable instead of the regular composite video
cable (RCA type), when available.
Coaxial Cable—Use to connect a signal to
your Digital or Analog RF Antenna In terminal.
Back Panel (R)
9