3
3
CHAPTER THREE
Operation
Memorizing Channels
Before you can use any of the special channel buttons (CH LM, FAV-CH), the available
channels must first be scanned and memorized. This is an easy, automatic process that
typically takes two minutes. To memorize channels:
NOTES
The Set-Top Box MUST be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel directly
by using the number buttons on the remote control.
3.1
Press the MENU button on the remote control.
1
Use the Menu Up/Down buttons to
2
highlight the Channel icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Memorize
Channel icon and press ENTER.
Use the Menu Up/Down buttons
3
to select Air or Cable (STD, HRC,
or IRC).
Use the Menu Up/Down buttons
to highlight the "Scan Start" icon
and press ENTER.
That's it. The Set-Top Box will automatically scan and store all
4
of the digital (DTV) channels and analog channels that are
available in your local area.
Press EXIT when channel memorization is complete.
5