4
4
CHAPTER FOUR
Special Features
Using Dynamic Range Compression (DRC)
When you switch channels, the volume may vary depending on the channel. The Dynamic
Range Compression function can adjust the volume difference automatically.
Press the MENU button on the remote control.
1
Use the Menu Up/Down buttons to
2
highlight the Setup icon and
press ENTER.
Use the Menu Up/Down buttons to
3
highlight the DRC: On (OFF) icon
and press ENTER.
Use the Menu Up/Down buttons to
alternate between DRC: On and
DRC: Off and press ENTER again.
Press EXIT.
4
NOTE
The DRC function operates only on digital channels.
4.7