Checking The Digital-Signal Strength - Samsung SIR-T165 Owner's Instructions Manual

3
3
CHAPTER THREE
Operation

Checking the Digital-Signal Strength

Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital
(HDTV) channels have either perfect reception quality or you will not receive them at all.
So, unlike analog channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital chan-
nels.
NOTE
"No Signal" may appear on the screen depending on the broadcasting station conditions, even
though an incoming broadcast signal exists.
Press the MENU button on the remote control.
1
Use the Menu Up/Down buttons
2
to highlight the Channel icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Check Signal
Strength icon and press ENTER.
If the signal strength meter indi-
3
cates that the signal is weak,
physically adjust your antenna to
increase the signal strength.
Continue to adjust the antenna
until you find the best position
with the strongest signal.
When you have finished adjusting your antenna, use the Menu
4
Up/Down buttons to highlight "Done" and press ENTER.
3.6