Table of Contents
Advertisement
3
3
CHAPTER THREE
Operation
Memorizing Channels
Before you can use any of the special channel buttons (CH LM, FAV-CH), the available
channels must first be scanned and memorized. This is an easy, automatic process that
typically takes two minutes. To memorize channels:
NOTES
The Set-Top Box MUST be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that chan-
nel directly by using the number buttons on the remote control.
Press the MENU button on the remote control.
1
Use the Menu Up/Down buttons to
2
highlight the Channel icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Memorize
Channel icon and press ENTER.
Use the Menu Up/Down buttons
3
to select Air or Cable (STD, HRC,
or IRC).
Use the Menu Up/Down buttons
to highlight the "Scan Start" icon
and press ENTER.
That's it. The Set-Top Box will automatically scan and store all
4
of the digital (DTV) channels that are available in your local
area.
Press EXIT when channel memorization is complete.
5
3.1
Advertisement
Table of Contents
