01193C(E)-CHAPTER 1
2/6/03
Y
O U R
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a laserdisc player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a laserdisc, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.7.
Œ VIDEO INPUT
´ AUDIO INPUTS
ˇ AUDIO-VIDEO MONITOR
1.4
C
O
: Y
N
HAPTER
NE
OUR
5:58 PM
Page 4
N
T V
E W
Video signals from VCRs, DVD players and similar
devices.
(INPUT1 and 2)
DVD AUDIO INPUTS
Audio signals from VCRs, DVD players and similar
devices.
Use these jacks to connect the audio signals
from a DVD player when using the DVD video
input jacks. When not using the DVD jacks, these
audio jacks function as audio for Video 2 or S-
VIDEO).
(For model CL-29C1W)
OUTPUTS
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a record-
ing VCR.)
TV
EW
¨ SUPER VIDEO INPUT
(For model CL-29C1W)
S-Video signal from an S-VHS VCR or DVD player.
ˆ DVD VIDEO INPUT
/
(For model CL-29C1W)
(INPUT 2)
Connect video from a DVD player.
Note: Only black and white signals are output
from a monitor in DVD mode.
Ø VHF/UHF
Connect to an antenna or to a cable TV system.