Samsung CL25D4 Owner's Instructions Manual page 17

01193C(E)-CHAPTER 2 2/6/03
I
N S TA L L AT I O N
5:58 PM Page 6
Connecting an S-VHS VCR (For model CL-29C1W)
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This
connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
INPUT 2 jacks on the
TV.
Make sure the jacks you are using are underneath the number "2."
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO INPUT jack on
the TV.
An S-video cable is usually included with an S-VHS VCR. (If not, check your local
electronics store.)
2.6
C T : I
HAPTER WO NSTALLATION