Boss BR-1600CD Basic Operation Gude page 63

fig.07-58d
5
Move the cursor to the TR AT ONCE
icon and press [ENTER/YES].
Alternatively, you can press [F1] (TR AT ONCE).
The Track At Once screen will appear.
fig.07-59d
6
Use [CURSOR] and the TIME/VALUE
dial to choose the track and V-Track
that you want to write.
7
Press [F4] (GO).
The Write Speed screen will appear.
fig.07-61d
8
Use the TIME/VALUE dial to set the
write speed.
Alternatively, if you want to use the write speed that
is currently displayed, proceed to Step 9.
Write speed
x2 (352 kbps) Writes twice as fast.
x4 (704 kbps) Writes four times as fast.
x8 (1408 kbps) Writes eight times as fast.
• The range of available write speeds can sometimes be limited by the type of media being used. In such a case, the BR-
1600CD will allow you to select only the supported speeds.
• If you are using CD-R or CD-RW discs intended for high-speed writing, the frequency of write errors may increase if
the x2 or x4 speed is selected. It is recommended that you use the x8 speed for high-speed discs.
• Although you could be forgiven for thinking that the x8 speed setting creates CD-R/RWs in half the time of the x4
setting, a slightly longer time will be required in practice. The data recorded in the BR-1600CD's audio track is
converted into CD format during the writing process, and this accounts for the extra time requirement.
Writing your finished song to a CD (Audio CD Write)
9
10
11
12
13
Press [ENTER/YES].
The message "Write Sure?" will appear.
Press [ENTER/YES].
The message "Now Writing..." will appear and
writing to the audio CD will begin. When writing has
been completed, the message "Finalize OK?" will be
displayed.
If you intend to write additional songs to
the same CD-R disc, press [EXIT/NO].
Alternatively, press [ENTER/YES] if no
more songs will be added to this disc.
If you press [ENTER/YES], the message
"Finalizing..." will appear and the finalization process
will begin. When the message "Complete!" appears, it
indicates that the finalization has been completed. For
more detailed information regarding finalization,
refer to "What is finalization?" (p. 67).
Press [EXIT/NO] several times to return
to the top screen.
Press the CD-R/RW drive's EJECT
button to eject the disc.
This completes the writing process.
It may take a period of several seconds before the disc
is actually ejected.
63