Boss BR-1600CD Basic Operation Gude page 39

Applying reverb for a warmer sound during recording (Reverb)
4
Press [EXIT/NO] to return to the top
screen.
• Although the sound you hear will include reverb, this effect is not actually applied to the sound to be recorded. (Only
the true sound of the performance will be recorded.)
• After recording, the values for reverb send levels set here for each audio input are automatically copied to the reverb
send levels of the corresponding recorded tracks. As a result, when you play back a track that was recorded with
reverb applied in this way, you will still be able to hear the same reverb. This may lead you to conclude that you
accidentally recorded the reverb together with the input source, but this is not the case. In actuality, the true sound
was recorded to the track, and reverb was reapplied to the recorded sound during playback. the BR-1600CD copies
these settings to ensure that the same sound heard during recording will be heard during playback; however, if you
no longer need to hear this reverb, set the corresponding reverb send level to zero. This will remove reverb from the
playback sound.
39