Table of Contents
Advertisement
08
Using other functions
4
Use the MASTER VOLUME dial to adjust the
volume for the zone you have selected.
This is only possible if you selected the Variable volume
control in ZONE Audio Setup on page 95.
5
When you're finished, press MULTI-ZONE
CONTROL again to return to the main zone controls.
You can also press MULTI-ZONE ON/OFF on the front
panel to switch off all output to the sub zone(s).
MULTI-ZONE remote controls
Set the MULTI-ZONE operation switch to ZONE 2 or ZONE
3 (VSX-23TXH only) to operate the corresponding zone.
The following table shows the possible MULTI-ZONE
remote controls:
Button
What it does
Switches on/off power in the sub zone.
INPUT SELECT
Use to select the input function in the sub
zone.
Input function
Use to select the input function directly (this
buttons
may not work for some functions) in the sub
zone.
Use to set the listening volume in the sub
MASTER
VOLUME +/–
zone.
MUTE
Mutes the sound or restores the sound if it
has been muted (adjusting the volume also
restores the sound).
Making an audio or a video recording
You can make an audio or a video recording from the
built-in tuner, or from an audio or video source
connected to the receiver (such as a CD player or TV).
Keep in mind you can't make a digital recording from an
analog source or vice-versa, so make sure the
components you are recording to/from are hooked up in
the same way (see Connecting your equipment on
page 15 for more on connections).
Since the video converter is not available when making
recordings (from the video OUT jacks) make sure to use
the same type of video cable for connecting your recorder
as you used to connect your video source (the one you
want to record) to this receiver. For example, you must
connect your recorder using Component video if your
source has also been connected using Component video.
Note
1 The volume levels of the main and sub zone(s) are independent.
2 • You won't be able to switch the main zone off completely unless you've switched off the MULTI-ZONE control first.
• If you don't plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this receiver is in
standby.
3 • The receiver's volume, Audio parameters (the tone controls, for example), and surround effects have no effect on the recorded signal.
• Some digital sources are copy-protected, and can only be recorded in analog.
• Some video sources are copy-protected. These cannot be recorded.
4 The attenuator isn't available with digital sources, or when using the Stream Direct (ANALOG DIRECT) modes.
70
En
For more information about video connections, see
Connecting an HDD/DVD recorder, VCR and other video
sources on page 28.
1
2
1
Select the source you want to record.
Use the input function buttons (or INPUT SELECT).
• If necessary, press
SEL to select the input signal corresponding to the
source component (see Choosing the input signal on
page 61 for more on this).
2
Prepare the source you want to record.
Tune to the radio station, load the CD, video, DVD etc.
3
Prepare the recorder.
Insert a blank tape, MD, video etc. into the recording
device and set the recording levels.
Refer to the instructions that came with the recorder if
you are unsure how to do this. Most video recorders set
the audio recording level automatically—check the
component's instruction manual if you're unsure.
4
Start recording, then start playback of the source
component.
Reducing the level of an analog signal
3
The input attenuator lowers the input level of an analog
signal when it's too strong. You can use this if you find
that the OVER indicator lights often or you can hear
distortion in the sound.
•
Press
input attenuator on or off.
DVD
BD
DVR
HDMI
ANT
TV
CD
CD-R
VIDEO
AUDIO
iPod USB
TUNER
XM
SIRIUS
REMOTE
INPUT
SETUP
SELECT
HDMI OUT
1
2
3
ZONE 2
SIGNAL SEL
MCACC
SLEEP
4
5
6
RECEIVER
, then press SIGNAL
4
INPUT
SELECT
HDMI OUT
AUDIO
1
2
3
SIGNAL SEL
MCACC
SLEEP
4
5
6
REMOTE
SBch
A.ATT
DIMMER
SETUP
7
8
9
D.ACCESS
CH LEVEL
CLASS
ZONE 2
0
ENTER
RECEIVER
, then press A.ATT to switch the
MPX
PQLS
MEMORY
INFO
CH
DISP
RECEIVER
TV CTRL
ZONE 3
MAIN
CH
INFO
DISP
TV CTRL
RECEIVER
ZONE 3
MAIN
Advertisement
Table of Contents
