Custom Setting Menu Items - Pentax Q Operating Manual

68

Custom Setting Menu Items

Set the [A Custom Setting 1-2] menus to fully use the functions of this camera.
Menu
1. AE-L with AF
Locked
2. Link AE to AF
Point
3. Auto Bracketing
Order
4. Shake Reduction
A1
4
Options
5. WB When Using
Flash
6. AWB in Tungsten
Light
7. AF Release
Options
8. AF Assist Light
9. AF with Remote
Control
10. Flash When
Retracted
11. Release While
Charging
A2
12. Save Menu
Location
13. Electronic
Shutter
Reset Custom
Functions
Item
Sets whether to lock the exposure value
when the focus is locked.
Sets whether to link the exposure and AF
point in the focusing area during multi-
segment metering.
Sets the order for Exposure Bracketing
shooting.
Sets whether to use Shake Reduction
during standby mode as well.
Sets the white balance setting when using
flash.
Sets whether to adjust the tungsten light
color tone when the white balance is set to
F (Auto White Balance).
Sets the action priority for when the shutter
release button is fully pressed in = mode.
Sets whether to use the AF assist light
when autofocusing in dark locations.
Sets whether to use autofocus when
shooting with remote control.
Sets whether to discharge the built-in flash
when retracted.
Sets whether to release the shutter while
the built-in flash is charging.
Sets whether to save the last menu tab
displayed on the monitor and to display it
again the next time the 3 button is
pressed.
Sets whether to use the electronic shutter
when using a lens that has a lens shutter.
Resets all the settings in the [A Custom
Setting 1-2] menus to the defaults.
Function Page
p.83
p.84
p.80
p.97
p.125
—
p.88
p.87
p.101
p.60
p.60
p.192
p.226
p.196