Setting The Playback Display Method - Pentax Q Operating Manual

Setting the Playback Display Method

154
You can set the initial magnification when enlarging images, and whether
to display the Bright/Dark Area warning in Playback mode.
1
Select [Quick Zoom] in the [Q Playback 1] menu, and
press the four-way controller (5).
2
Use the four-way controller (23)
to select the magnification, and
press the 4 button.
Select from [Off] (default setting), [x2],
[x4], [x8] or [x16].
3
Use the four-way controller (23) to select [Bright/Dark
Area], and use the four-way controller (45) to select O or
6
P.
When set to O, bright portions blink red and dark portions blink yellow.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
The Bright/Dark Area warning is not displayed in RGB histogram display and
Detailed information display.
1
Slideshow Slideshow
Quick Zoom Quick Zoom
Bright/Dark Area Bright/Dark Area
Delete All Images Delete All Images
MENU Cancel Cancel
Off Off
X2 X2
X4 X4
X8 X8
X16 X16
OK OK
OK