Adjusting The White Balance With Color Temperature - Pentax K-7 Operating Manual

196
Adjusting the White Balance with Color
Temperature
Use figures to set the color temperature.
1
Select K/K in Step 2 of p.192 and press the four-way
controller (5).
2
Use the four-way controller (23) to select the color
temperature (default setting: 5000K).
You can save three settings. Settings are saved to the location selected
here.
3
Press the four-way controller (5).
The [Color Temperature] screen appears.
4
Adjust the color temperature with
6
the front or rear e-dial.
Color temperature steps differ depending on the e-dial.
* The default setting for Color Temperature step units is [Kelvin]. You can change the
step units to [Mired] in [21. Color Temperature Steps] in the [A Custom Setting 3]
menu (p.86). However, figures are converted to Kelvin and displayed.
You can also use the steps for "Fine-tuning the White Balance" (p.193)
for fine-tuning.
e-dial
Front (R)
Rear (S)
Kelvin
1 Step (100K)
10 Steps (1000K)
Color
Temperature
5000K
B B
±0 ±0
±0
MENU
Cancel Check
Mired*
1 Step (20M)
5 Steps (100M)
K
G G
A A A
M M
OK
OK