Adjusting The White Balance With Color Temperature - Pentax K-5 Operating Manual

210
Adjusting the White Balance with Color
Temperature
Use figures to set the color temperature. Up to three settings can be
saved.
1
Select K in Step 2 on p.206 and press the four-way
controller (5).
2
Use the four-way controller (23) to select K1 to K3 and
press the four-way controller (5).
The [Color Temperature] screen appears.
3
Adjust the color temperature
with the front or rear e-dial.
6
Color temperature steps vary depending on the e-dial.
Front (R)
Rear (S)
*1 The default setting for Color Temperature step units is [Kelvin]. You can change the
step units to [Mired] in [13. Color Temperature Steps] of the [A Custom Setting 2]
menu (p.91). However, figures are converted to Kelvin and displayed.
You can also use the steps in "Fine-tuning the White Balance" (p.207) for
fine-tuning.
E-dial
1 Step (100K)
10 Steps (1,000K)
Color
Temperature
Kelvin
1 Step (20M)
5 Steps (100M)
5000K
B B
±0 ±0
±0
MENU Cancel Check
*1
Mired
K1
G G
A A A
M M
OK OK