Table of Contents
Advertisement
Problem
The printed image
has poor tone
balance.
• The printed image
is too bright.
• There is too much
image noise in the
dark areas of the
printed image.
A message
indicating "The
USB port cannot be
located" is displayed
on the computer.
4 Printer driver
For operation details, see the help on the supplied CD-ROM.
Cause and Remedy
• You can adjust the image quality on the [Image
Adjustment] tab of the printer driver
• Changing [Auto Mode] setting to [OFF] on the [Image
Adjustment] tab of the printer driver
these problems.
• Have you connect the printer to USB port that supports
printers?
⇒ USB ports are displayed as [USB001] and [USB002].
Check the USB port configuration.
Checking method
• For Windows XP
Select [Start] → [Control Panel] → [Printers and
Other Hardware] → [Printers and Faxes] and open
[Properties] window for this printer. Select USB ports
on [Ports] tab.
• For Windows 2000
Select [Start] → [Settings] → [Printers] and open
[Properties] window for this printer. Select USB ports
on [Ports] tab.
• For Windows 98 SE/Me
Select [Start] → [Settings] → [Printers] and open
[Properties] window for this printer. Select USB ports
on [Print to the following port] on [Details] tab.
4
.
4
may improve
Page
—
—
—
97
Advertisement
Table of Contents
