External Display - Panasonic Toughbook CF-S9KWAZG1M Reference Manual

External Display

You can switch the output destination to an external display.
Connect the external display to the external display port (A).
<CF-S9 Series>
You can also switch the output destination to an external HDMI display.
Connect the HDMI display to the HDMI port (B).
<CF-C1 Series>
Switching the Display Mode
The following are the display modes.
Computer only
Duplicate
Extend
Projector only
Do not switch using a method other than the one explained here.
Using key function
1
Press
Windows 7
Press
Windows XP
2
Click the display mode.
You can switch the display mode by pressing key.
NOTE
Until Windows startup is completed (during Setup Utility, etc.), the simultaneous display cannot be used and pressing
Fn + F3 switches the display between the internal LCD and the external display.
<CF-F9 Series>
The screen is displayed only on the internal LCD.
The same screen is displayed on the internal LCD and the external display.
You can use the internal LCD and the external display as an extended display area.
The screen is displayed only on the external display.
+ or + or click
P Fn F3
+ .
Fn F3
<CF-S9 Series>
(Start) - [Connect to a Projector].
98