Name/Time - Panasonic KX-HCM270 Operating Instructions Manual

Operating Instructions

3.5.3 Name/Time

Name/Time window is used to assign a name to each Network Camera. Date
and Time entered on Name/Time window are used for the Alarm/Timer mode in
the Image Transfer feature and on the Buffered Image screen. NTP automatically
adjusts the internal clock of Network Camera.
1.
Click [Name/Time] on Setup Page.
2.
Enter the Camera Name and Date and Time. Click [Save] when finished.
• Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.
Camera
Name
Date and
Time
62
Instructions for the data fields
The Camera Name appears on the Single Camera screen.
• Refer to unavailable character set 1 on page 108.
• Refer to displayable character set on page 109.
First click [AM/PM] or [24H]. The display changes in each time
mode.
Note
Time setting will be affected by the temperature. Time
setting may lose one minute per month in 25 °C (77 °F)
condition. It may lose five minutes in a colder or hotter
condition. Please use Auto Adjustment feature when
Network Camera is installed where the temperature
changes hugely in daytime and night-time.