Operating Instructions
4.
Roll up three putties around the cables and fit them into the holes to prevent
water from getting inside Network Camera. Use last putty to fix the spot.
Notes
•
Confirm Network Camera is functioning before puttying the cables.
Putties and Self Bonding tape cannot be used twice.
•
Check the length and the type of the Ethernet cable before fixing with
putty.
5.
Cover the putties by rolling.
•
Self Bonding tape is used to mount Network Camera on a wall or ceiling,
so leave half the Self Bonding tape.
5–10 mm
(0.2–0.4 inches)
100
Three putties
Seal cables with
Self Bonding tape.
Last putty
Do not cover
the ventilation hole.