[Type 3]—Internet Direct Connection with a Modem
Network Camera can be installed alone without PC on the network. When you set
up Network Camera in [Type 3], connect Network Camera temporarily in [Type
1], [Type 2] or [Type 4].
Internet
Note
Some xDSL services use PPPoE. Network Camera does not support PPPoE.
If the Internet connection requires PPPoE, connect with the broadband router
supporting PPPoE like [Type 2].
[Type 4]—Direct Connection with a PC
Network Camera can be connected to a PC directly.
Notes
•
Use a category 5 cross cable when connecting directly with the cable
to the PC.
•
Direct Connection with PC requires IEEE 802.11b wireless devices
such as wireless LAN card and wireless USB adaptor.
•
Change to AdHoc mode. (Default is Infrastructure mode.) Refer to page
32 for Infrastructure and AdHoc mode.
[For assistance, please call: 1-800-272-7033]
Modem
Operating Instructions
19