Panasonic KX-HCM270 Operating Instructions Manual page 105

Making holes on mortar wall
1.
Put Flexible Stand on the wall where you plan to install Network Camera and
mark the points where you are going to make holes.
2.
Make holes with an electric drill. Insert plastic plugs (customer provided) into
the holes and push them inside the holes with the hammer.
Change the drill depending on the
concrete wall or the tiled wall.
Note
Mortar wall is easy to come off in drilling.
3.
Mount the Flexible Stand by using the screws (accessories).
[For assistance, please call: 1-800-272-7033]
Plastic Plug
Caulk around the holes
if necessary.
Operating Instructions
Hammer
105