Panasonic KX-HCM230 Operating Instructions Manual page 79

White Balance
Power Line
Frequency
Brightness
Control
Pan/Tilt/Preset
Control
Preset
Program
Control
Pan Range
Tilt Range
Instructions for the data fields
Notes
• The wrong White Balance setting will cause Network
Camera to display colors improperly. In most cases Auto is
suggested.
• White Balance is also registered in preset programming.
It can select Flicker Correction by power line frequency.
• 60 Hz (default)
Select 60 Hz in the United States.
Brightness Control can be locked.
Locked appears on the operation bar on page 42 when clicking.
Pan/Tilt/Preset Control can be locked. Pan/Tilt/Preset Control
also disables Click to Center operation.
Locked appears on the operation bar on page 42 when clicking.
Preset Program Control can be locked.
Program button disappears on the operation bar on page 42.
Pan Range can be selected. Refer to page 80 on specifying the
Pan/Tilt range.
Right/Left End appears on the operation bar on page 42 when
having reached the selected end.
Tilt Range can be selected. Refer to page 80 on specifying the Pan/
Tilt range.
Up/Down End appears on the operation bar on page 42 when
having reached the selected end.
[For assistance, please call: 1-800-272-7033]
• 50 Hz
Operating Instructions
79