Panasonic KX-HCM230 Operating Instructions Manual page 51

Item
(1) Go to Top Page
(2) Network
(3) Name/Time
(4) Security:
Administrator
(5) Security:
General User
(6) Top View Image
(7) Image Transfer
(8) Camera Setup
(9) Multi-Camera
[For assistance, please call: 1-800-272-7033]
Links to Top Page. You can access Single/Multi-
Camera screen in Motion JPEG/JPEG - Regularly
Refresh. Refer to page 53.
Configures the network setting (Static/DHCP,
Default Gateway, Port Number, DNS, DDNS and
Bandwidth). Refer to page 54.
Sets the Camera Name on the Single Camera
screen. Date and Time is used in the Alarm/Timer
mode in the Image Transfer feature and On the Air
time setting on Top View Image Setting window.
NTP automatically adjusts the internal clock of
Network Camera. Refer to page 58.
Sets administrator ID and password. Authentication
window can be enabled. Administrator should
control Network Camera. Refer to page 60.
Sets general user ID and password. General user is
the registered user. Refer to page 62.
Sets the initial language, Title, Image URL, Link
URL, the image resolution, image quality, refresh
interval and the Limit time of Continuous Motion and
On the Air time. Top View Image screen consists of
Single Camera and Multi-Camera screen. Refer to
page 64.
Enables the Alarm/Timer mode in the Image
Transfer feature. Network Camera can transfer the
image via E-mail or FTP. The alarm/timer trigger can
be set on Image Transfer window. Refer to page 66.
Sets White Balance and Power Line Frequency. You
can lock the Brightness, Pan/Tilt/Preset and Preset
Program Control features. You can also select Pan
Range and Tilt Range. Refer to page 78.
The Multi-Camera screen needs to set up these
parameters. Enter the Camera Names and IP
addresses of each Network Camera. The Multi-
Camera can display up to four images in a window.
Refer to page 81.
Operating Instructions
Description
51