Panasonic KX-TA824 Operating Manual page 17

REDIAL:
Used to redial the last number dialed.
INTERCOM:
Used to make or receive intercom calls.
AUTO ANS (Auto Answer)/MUTE:
Used to answer an intercom call
automatically in hands-free mode or to
mute the built-in microphone during a
conversation.
HOLD:
Used to place a call on hold.
CONF (Conference):
Used to establish a 3-party conference
call.
FWD/DND (Call Forwarding/Do Not
Disturb):
Used to set the FWD or DND feature for
the extension.
Navigator Key:
Used to adjust the volume of the speaker,
handset and headset, and the display
contrast, or to select desired items.
Volume Key:
Used to adjust the volume of the speaker,
handset and headset.
Customized Buttons
Throughout this manual, when the name of a button is written in parentheses, such as "(G-CO)", this means
that it is a flexible button that has been customized. To customize flexible buttons, refer to "3.1.3 Flexible
Button Assignment".
1.1 Before Operating a Telephone
MESSAGE:
Used to leave a message waiting
indication, call back the party who left a
message waiting indication, or play back
voice messages. This button is provided
with an LED (Light Emitting Diode),
except for on KX-T7700 series
telephones. With KX-T7700 series
telephones, the Message/Ringer Lamp is
lit when a message waiting indication is
left at your extension.
MONITOR:
Used to select hands-free dialing and
monitor operation.
TRANSFER:
Used to transfer a call to another party.
FLASH/RECALL:
Used to disconnect the current call and
make another call without hanging up, or
to send an EFA (External Feature
Access) signal to the telephone company
or host PBX to access external features.
VOICE CALL:
Used to answer an intercom call
automatically.
PROGRAM:
Used to enter and exit programming
mode.
Programmable Feature (PF):
Located in the right column of the CO
(PF)
button array on certain telephones or on
the DSS Console. Used to access a
preprogrammed feature. Mostly used as a
One-touch Dialing button.
Operating Manual 17