Panasonic Lumix DMC-L10 Operating Instructions Manual page 73

∫ Changing the settings for [STEP] and
[SEQUENCE] in auto bracket
1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select
[AUTO BRACKET] in the [REC]
] and then press 1.
menu [
3 Press 3/4 to select [STEP] or
[SEQUENCE] and then press 1.
4 Press 3/4 to select the setting
and then press [MENU/SET].
• You can also use the front dial or the
rear dial to set.
When [STEP] has been selected in the
screen shown in step
• [STEP]
– [ 1 ]
/ 3 EV
– [ ]
2
/ 3 EV
– [ ]
1EV
– [ ]
1 1
/
3 EV
– [ ]
1 2
/
3 EV
– [ ]
2EV
When [SEQUENCE] has been selected
in the screen shown in step
• [SEQUENCE]
– [0/`/_]
– [`/0/_]
MENU
/SET
3
3
5 Press [MENU/SET] twice to close
the menu.
• You can also press the shutter button
halfway to close the menu.
• When taking pictures using auto bracket
after setting the exposure compensation
range, the pictures taken are based on the
selected exposure compensation range.
• The auto review function is activated
regardless of the setting for auto review.
(The picture is not enlarged.)
• The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
• When the flash is activated or the number
of recordable pictures is 2 or less, you can
take only 1 picture.
• [STEP] is fixed to [
[SEQUENCE] is fixed to [0/j/i] in auto
mode [ ].
Advanced
] and
1
/
3 EV
VQT1G28
73