Panasonic Lumix DMC-L10 Operating Instructions Manual page 30

Preparation
[USB MODE]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P26)
Select the USB communication system
after or before connecting the camera to
your PC or your printer with the USB
connection cable (supplied). (P118, 120)
[ SELECT ON CONNECTION]:
Select either [PC] or [PictBridge (PTP)]
if you connected the camera to a PC or
a printer supporting PictBridge.
[ PC]:
Set after or before connecting to a PC.
[ PictBridge (PTP)]:
Set after or before connecting to a
printer supporting PictBridge.
• When [PC] is selected, the camera is
connected via the "USB Mass Storage"
communication system.
• When [PictBridge (PTP)] is selected, the
camera is connected via the "PTP (Picture
Transfer Protocol)" communication
system.
30
VQT1G28
[HIGHLIGHT]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P26)
[OFF] No highlight display
[ON] When the auto review function
is activated or when playing
back, white saturated areas
appear blinking in black and
white.
[ON]
• If there are any white saturated areas, we
recommend compensating the exposure
towards negative (P44) referring to the
histogram (P55) and then taking the
picture again. It may result in a better
quality picture.
• There may be white saturated areas if the
distance between the camera and the
subject is too close when taking pictures
with the flash.
If [HIGHLIGHT] is set to [ON] in this case,
the area directly illuminated by the photo
flash will become white saturated and
appear blinking in black and white on the
LCD monitor.
[VIDEO OUT]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P26)
Set to match the color television system in
each country.
[NTSC]: Video output is set to NTSC
system.
[PAL]: Video output is set to PAL
system.
• Video output is available in playback
mode only.
[OFF]