Panasonic Lumix DMC-L10 Operating Instructions Manual page 66

Advanced
∫ Available flash settings by recording
mode
The available flash settings depend on the
recording mode.
(±: Available, —: Not available, ¥: Initial
setting)
¥
— —
¥ ± ±
¥ ± ±
¥ ± ±
¥
— —
± ¥ ±
¥ ± ±
± ¥ ±
± ¥ ±
— — —
— — —
— — —
— — —
¥ ±
—
¥ ±
—
¥ ±
—
¥ ±
—
¥ ±
—
¥ ±
—
¥ ±
—
— — —
— — —
— — —
— — —
— — —
¥ ±
—
± ¥ ±
1
± ¥ ±
2
¥ ±
—
66
VQT1G28
±
— — —
± ± ± ±
± ± ± ±
± ±
— —
± ±
— —
±
— — —
±
— — —
±
— — —
± ±
— —
¥
— — —
¥
— — —
¥
— — —
¥
— — —
±
— — —
±
— — —
±
— — —
±
— — —
±
— — —
±
— — —
±
— — —
¥ ±
— —
¥
— — —
¥
— — —
¥
— — —
¥
— — —
±
— — —
±
— — —
±
— — —
±
— — —
• You cannot set AUTO/Red-eye reduction
[ ], Forced ON/Red-eye reduction
[ ] or Slow sync./Red-eye reduction
[ ] when 2nd Curtain Synchro is set.
• The flash setting may change if the
recording mode is changed. Set the flash
setting again if necessary.
• The flash setting is memorized even if the
camera is turned off. However, the
advanced scene mode or the scene mode
flash setting is reset to the initial setting if
the advanced scene mode or the scene
mode is changed and then used.
∫ The available flash range to take pictures
(when the supplied lens is attached)
The available flash settings for the built-in flash
differ depending on the ISO sensitivity setting.
Available flash range
ISO
sensitivity
(6.6 feet) to
AUTO
(18.0 feet)
(6.6 feet) to
ISO100
(9.2 feet)
(6.6 feet) to
ISO200
(12.8 feet)
(6.6 feet) to
ISO400
(18.0 feet)
(6.6 feet) to
ISO800
(25.6 feet)
(6.6 feet) to
ISO1600
(36.1 feet)
Wide Tele
2.0 m 1.0 m
(3.3 feet) to
5.5 m 3.7 m
(12.1 feet)
2.0 m 1.0 m
(3.3 feet) to
2.8 m 1.9 m
(6.2 feet)
2.0 m 1.0 m
(3.3 feet) to
3.9 m 2.6 m
(8.5 feet)
2.0 m 1.0 m
(3.3 feet) to
5.5 m 3.7 m
(12.1 feet)
2.0 m 1.0 m
(3.3 feet) to
7.8 m 5.3 m
(17.4 feet)
2.0 m 1.0 m
(3.3 feet) to
11.0 m 7.5 m
(24.6 feet)