Panasonic Lumix DMC-L10 Operating Instructions Manual page 138

Digital camera/lens kit
Hide thumbs Also See for Lumix DMC-L10:
Table of Contents

Advertisement

Others
[MEMORY CARD PARAMETER ERROR]
Use a card compatible with this unit. (P6,
23)
• You can only use an SDHC Memory Card
if using cards with 4 GB or more capacity.
[PLEASE TURN CAMERA OFF AND
THEN ON AGAIN]
Check that the lens is attached correctly
and then turn the camera off and on.
[MEMORY CARD ERROR
PLEASE CHECK THE CARD]
An error has occurred accessing the card.
Insert the card again.
[READ ERROR
PLEASE CHECK THE CARD]
An error has occurred reading the data.
Insert the card again. Make sure the card is
inserted properly and then play back again.
[WRITE ERROR
PLEASE CHECK THE CARD]
An error has occurred writing the data.
Turn the camera off and remove the card.
Insert the card again and turn the camera
on. Make sure the camera is turned off
before removing or inserting the card to
avoid damage.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there
are no remaining folder numbers that can
be used. (P119)
Format the card after saving necessary
data on a PC etc. (P32) If you execute
[NO.RESET] in the [SETUP] menu after
formatting, the folder number is reset to
100. (P29)
[PICTURE IS DISPLAYED FOR 4:3 TV]/
[PICTURE IS DISPLAYED FOR 16:9 TV]
• The video cable is connected to the
camera. Press [MENU/SET] if you want to
delete this message at once.
• Select [TV ASPECT] in the [SETUP]
menu to change the TV aspect. (P31)
138
VQT1G28
• This message also appears when the
USB connection cable is connected to the
camera only.
In this case, connect the other end of the
USB connection cable to a PC or a printer.
(P118, 120)
[CANCEL LIVE VIEW MODE]/[LIVE VIEW
MODE CANNOT BE SELECTED]
If you use Live View where the temperature
is high or for a long period of time, the
temperature of the image sensor will
increase and Live View may become
unusable. Switch to using the Viewfinder for
taking pictures or turn the camera off for a
short while.
[PRINTER BUSY]/[PLEASE CHECK THE
PRINTER]
The printer cannot print. Check the printer.
[THE LENS IS NOT ATTACHED
PROPERLY.]
Is the lens correctly attached?
Detach the lens and then attach it again.
(P15)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc l1 - lumix digital camera slrLumix dmc-l10k

Table of Contents