Using The Af Trigger (Dmc-Lc80/Dmc-Lc70) - Panasonic Lumix DMC-LC50 Operating Instructions Manual

Panasonic lumix dmc-lc50: user guide
Table of Contents

Advertisement

Using the AF Trigger
(DMC-LC80/DMC-LC70)
Prefocus is a technique to focus on the point where the subject comes in advance,
and it is used when taking a picture of the subject with quick motion.
This function is suitable when the distance between the camera and the subject is
certain.
Preparation
• Set the mode dial except for [
1
Select [AF TRIGGER] and set it to
[FOCUS].
2
/
REC
3
SPOT MODE
AUDIO REC.
AF TRIGGER
SHUTTER
D.ZOOM
SELECT
SET
WB
• Close the menu by pressing
[MENU] button after finishing the
setting.
2
Aim the AF area to the point
where you want to focus (P30) and
press the [FOCUS] button.
Recording pictures (advanced)
]/[
]/[
SETUP
OFF
OFF
FOCUS
OFF
EXIT
MENU
WB
1600
19
AF
FOCUS
68
]. (P29)
• When the subject is focused, the
AF area turns from white to green
and the focus indication 1 lights up
for 1 second. If the subject is out of
the focus range, the focus
indication will keep on blinking.
• Even when pressing the shutter
button halfway, the focus will not be
changed unless you press the
[FOCUS] button again.
• When you press the shutter button
halfway, [
AF
FOCUS
disappears and then the aperture
value and the shutter speed are
displayed.
• When you press the shutter button
halfway without pressing the
[FOCUS] button, the [
indication turns to red.
] indication
]
AF
FOCUS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents