Taking Pictures Using The Built-In Flash - Panasonic Lumix DMC-LC50 Operating Instructions Manual

Panasonic lumix dmc-lc50: user guide
Table of Contents

Advertisement

Taking Pictures using the Built-in Flash

Preparation
• Set the mode dial except for [
ª Switching the flash setting
: AUTO
The flash is automatically activated
according to the recording condition.
: AUTO/Red-eye reduction
The flash is automatically activated
according to the recording condition.
It reduces the red-eye phenomenon
(eyes of the subject appear red in
photo flash) by lighting the flash at
1 second before actually recording
the picture.
Use this when you take pictures of
people in low lighting conditions.
: Forced ON
The flash is activated every time
regardless of the recording condition.
Use this when your subject is back-lit
or under fluorescent light.
: Slow sync./Red-eye reduction
When you take a picture with a dark
background landscape, it makes the
shutter speed slow when the flash is
activated, so that the dark
background landscape will become
bright. Simultaneously it reduces the
red-eye phenomenon.
Use this when taking pictures of
people in front of a dark background.
Recording pictures (basic)
]/[
WB
]/[
]. (P29)
: Forced OFF
Even in dark places, the flash is not
activated.
Use this when taking pictures in
places where use of the flash is not
allowed.
ª Available flash settings
40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents